Assembly of Multifunctional stretcher

- Aug 18, 2017-

Assembly: Replace the fixed screws at one end of the stretcher folding place with the growth screws, which are connected with the holes at the bottom of the frame (movable), then the right angle flat iron is fixed on the tripod screw, and the upper and lower ends of the bracket are connected with the hole of the frame 50cm and the rectangular flat iron respectively, and the canvas system is sheathed on the frame, and the screw is fixed on the connecting place of the transfusion frame and the flip card.

Use: Open stretcher and frame, fasten the bracket, erect the infusion rack, connect the steel pipe with the moving card. After use, loosen the moving card, retract the steel tube bracket, infusion rack, and close the stretcher.